Techko AF080 warranty Shredder, Safety Instructions/Warnings, Power

SHREDDER

This TECHKO shredder features a Master Control Switch on the side of the unit, and Forward/Auto, On/Off, Reverse buttons located on the head of the shredder.

This shredder is designed to AUTO FEED and cross cut shred 3-5 sheets at a time when loading a maximum of 80 sheets in the tray. There are four LED lights built into the unit. The "Power " light indicates that the shredder is on and ready to use. The "Basket Full" light indicates that the basket is at full capacity and the unit will stop automatically for you to empty. The "Overheat" light indicates that the cycle time has been exceeded. The "Overload" light indicates that the shredder has exceeded the maximum sheet capacity. Please see operation instructions for more information.

SAFETY INSTRUCTIONS/WARNINGS

Your safety as well as the safety of others is important to TECHKO. In this manual and on the product are important safety instructions. PLEASE READ ALL OF THE SAFETY INSTRUCTIONS CAREFULLY BEFORE OPERATING. If you have questions regarding the operation of your shredder, please call customer service prior to operation.

CAUTION!

Before using your shredder, be sure to observe the following precautions:

1.Keep children and pets away from the shredder. Serious injury could occur.

2.Always follow all warnings and instructions outlined in this manual, on the shredder, and on the shredder packaging.

3.Never insert your hands or fingers into the shredder feed slot(s). Keep personal and loose objects such as jewelry, hair, neck ties, etc, away from the feed slots. Never put your face near the shredder while the unit is plugged in. Serious injury could occur.

4.This product is intended to shred paper, credit cards, CDs, and DVDs only. Do not shred paper clips or other hard materials. Do not shred labels or envelopes. Doing so will damage the cutting system.

5.This shredder is not designed for heavy commercial usage. Do not exceed the recommended shred capacity. Do not operate for extended periods of time.

6.IMPORTANT-Always unplug the shredder when it's not in use and also prior to cleaning, moving, servicing or any action other than normal operation.

7.This shredder should never be placed near or over a radiator, heat register, or water.

5.The "Basket Full" light indicates that the basket is at full capacity. The unit will stop automatically and you must clear the basket.

B a sekt Fl lu Oevr haet

6.The "Overheat" light indicates that the cycle time has been exceeded. The shredder will automatically shut down until it is safe to resume shredding. Cycle time:30 minutes.

Basket Full Overheat Overload

7.Auto Reverse: When too much paper is loaded at once, the motor will stop and automatically reverse for a short period. You will need to pull the paper out from the paper feeding slot! Once out, turn the unit off and then turn the unit back on to reset.

		Forw
Overheat	Overload	Power

8.To use the Forward or Reverse Key/Buttons you need to keep the button pressed down to continue the forward or Reverse function.

r d / uAt o O n / Of f R e v res e

8.The power supply cord serves as the disconnect function for the shredder. Do not operate with a damaged power supply cord.