When the line begins with VL, VH or U go to point 5.

3.When the line begins with CH or CC: Make use of the directional keys Left/Right to select either CH (aerial) or CC (cable).

4.Validate by pressing ok.

5.Press the directional key Left or Right to start Channel Set-up in either descending or ascending order.

When a channel is found, the pictures appear. If the pictures are poor, make use of the directional keys Up/Down to select the

line ->.<-and try to improve picture quality with the directional keys Left/Right.

6.Then select PR--with the Up/Down keys and enter the number of the programme/channel corresponding to the pictures. This operation can also be perfor- med with directional keys Left/Right.

7.Store the programme by pressing ok.

To find the next programme, re-start Channel Set-up by means of the directional keys Left/Right.

To leave the menu, press exit.

How to adjust the picture?

Press the key menu once to call up the menu window. With the directional keys Up/Down, select the feature you want to adjust (brightness, colour, contrast, sharpness, tint). Now perform the adjustment by means of the directional keys Left/Right.

Tint adjustment is possible for

NTSC-pictures only.

To close the menu window, press exit.

Settings are stored until you proceed to another change.

GB

How to modify the preferences?

1.Press the menu key once.

2.Adjust the picture as described above.

3.Store by pressing the red key.

Note: Settings performed as described above supersede the “average adjustments” made by the manufacturer.

How to restore the preferences?

With the red key.

How to adjust the volume?

With the key volume + or -. To switch the sound on or off, press mute.

How to zap?

With key pr+ or pr-.

How to display a channel number? Press the key info to display or erase the channel number, as well as the time remaining until timer-programmedswitching-off.

If the channel has been fine tuned, the symbol ->.<-is also displayed.

How to program switching-off?

Press the Green key , first, then, with the directional keys Left/Right, set on the screen the time remaining (in 10-minute increments up to a maximum time of 4 hours) until shutdown of the TV set.

To exit the menu, press exit.

To cancel, first press the Green key and then, by means of the directional key Left, reset the time remaining on -:--.

When the programmed remaining time is over, the TV set will switch on standby. Switching the TV set off by means of the On/Off-button deactivates programmed switching-off.

5