How to use Videotext? (If included)

Press the key text to display the Summary (page 100).

Calling up a page

Enter the 3 digits of the number (e.g. 150,

170)of the page you want to read. After a few moments, the page will be displayed. To visualise the next or previous page, press the directional keys Left/Right.

Auto-scrolling pages

You may stop the page scrolling with the red key. This has the effect that STOP is displayed instead of the page number.

When pressing the red key again, page scrolling will start again.

Prize competitions

By means of the green key, you can either display or hide the solutions.

Zoom

With the yellow key, you can subsequently enlarge the upper and the lower half of the screen page and then switch back to full screen page display.

Videotext display

The blue key enables you to superpose a videotext page on the standard TV picture and to switch back to

the standard TV picture.

Fastext

When videotext pages are broadcast as per the Fastext standard, you can use the corresponding colour keys to select one out of the 4 headings displayed in the footer. Selection of a given heading may have the effect to display further headings.

Use the directional keys Up/Down to switch over between standard TV programme and Fastext display.

Certain programmes use videotext to broadcast subtitles, as well as constantly updated news. These pages can be found in the videotext summary. Once you have found the page, the subtitle and/or news will be superposed on the TV picture.

To leave videotext, press exit.

How to prevent the TV set from being operated?

Hold key B on the remote control down for over 4 seconds until the red LED on the TV set flashes.

The keys of the TV set are now locked and switching it on again will be possible by means of the remote control only.

Keep the remote control out of the reach of children.

To unlock the keys of the TV set, make use of the number keys on the remote control.

The keys of the TV set will also remain locked after timer-programmed switching-off.

The lock function will also be activated when the TV set is switched on standby or switched off with its On/Off switch before the time remaining until programmed switching-off is over.

How to switch off the set?

To switch the TV set off, press the key B on the remote control or use the On/Off switch on the TV set.

When the selected channel broadcasts no programme, the TV set will be switched off automatically after a couple of minutes.

6