Day to Day Operation

Switching On - Selecting Programmes

Switch on the television set using the main ON/OFF switch if the indicator is off.

GB If it is on, enter the desired programme number.

For programmes 1 to 9:

Press the corresponding number on the remote control.

For programmes 10 to 99 (e.g. 24) :

Press and hold the decimal (tens) number (2): 2 -

then press the units (4) number briefly: 2 4

Volume Adjustment - Sound Mute

Press the buttons to turn the sound up or down.

Press the button to turn the sound off.

The sound returns if the button is pressed again.

Zapping

Press the buttons to scroll through the programmes stored in memory.

Personal Adjustments

Press the red button to call up your personal adjustments (See Picture Adjustments).

Display

Press the yellow button to display the programme number and stand–by time (if sleep timer command is activated).

If the channel has been fine tuned, the

symbol is also displayed.

 

This information disappears automatically after a few seconds. Press the yellow

button

again to delete this information.

 

 

Stand-by - Sleep Timer

Press the button to switch the television set to stand–by mode. The Stand–by light turns red. The television set will automatically switch to Stand–by after a few minutes if there is no signal on the channel being watched.

Child Lock

You can prevent the use of your television set using the keypad.

To do this, switch off the television by pressing and holding down the stand–by button of the remote control for more than 4 seconds.

The TV set is also child locked:

-after the sleep timer function

-if it has been switched to stand–by or switched off when the sleep timer function has been programmed.

The stand–by light flashes to indicate that the child lock is activated. The set can only be switched on again using the numerical keys of the remote control.

10