television set

picture adjustments

Subtitles Zoom

Select the Subtitles Zoom line (green key).

You may select

Off

: programme without subtitles

 

On

: subtitled programmes.

In this case, an additional line (Subtitles position) appears

You may choose between a higher or lower framing, for example, for sub-titled programmes.

Select Subtitles position (green key),

then set your picture lift.

Remove the menu from the screen.

PICTURE

PIP

FORMAT

Format

4/3

16/9

Subtitles Zoom

Off

On

PICTURE

PIP

FORMAT

Format

4/3

16/9

Subtitles Zoom

Off

On

Subtitles position Down(-)

up (+)

television set

sound adjustments

NICAM DIGITAL STEREO

NICAM (Near Instantaneous Companded Audio Multiplex) digital audio.

The digital signal broadcast together with the existing sound and pictures of terrestrial television are decoded by this receiver to enable high quality stereo sound to be reproduced with advantages similar to those of compact discs. i. e. extended dynamic range and channel separation with low noise and low distortion. These are considerable benefits compared with the current standard system. The digital channel separation will allow the Broadcasters to transmit dual languages as en alternative feature after the service is established.

Dolby* Surround Pro Logic

You will be able to take full advantage of this exciting new facility. The increase in over all realism and ambience created by this new dimension in television sound will bring increased viewing enjoyment to all forms of programme materiel to sport as well as the more obvious advantages to all forms of musical entertainment.

In the absence of NICAM signals or if the NICAM signal becomes extremely weak, the receiver will select the standard system automatically.

The standard signal can also be chosen by selecting the mono mode using the appropriate IMC on screen graphics display. This is known as forced mono.

Derived from the DOLBY-STEREO system used in cinemas, Dolby Surround Pro Logic enables you to re-create the acoustic environment of the cinema in your own home (with a DOLBY - STEREO signal), or to obtain enhanced sound effects (with a mono or stereo signal).

You have three options :

•Connect two sets of speakers (Pro Logic),

•Connect one set of speakers (Dolby Phantom or Dolby Stereo),

•Use the television sound system only (Pro Logic mode off).

Make sure that the following steps are carried out in the order shown.

•Turn off the television at the main power switch.

•Connect the speakers to the appropriate sockets and make sure that the black speaker terminals on the speakers are connected to the black terminals on the television, and likewise for the red terminals.

•Configure the television for the speakers that are connected or for the acoustic effect you wish to obtain.

•Balance the acoustic environment.

When these steps have been completed, you can carry out the other sound settings.

*“ DOLBY “ and the double D symbol are registered trade-marks belonging to the Dolby Laboratories Licencing Corporation.

14