8
ENGLISH
INSTALLATION OF SATELLITE RECEIVER- Connect the LNB coaxial cable to Socket dIF INPUT A.
- You can, if applicable, connect a second LNB to IF INPUT B connector e. Plug F must be
tightened by hand on the threading of the plug. Do not use any tools. Take care not to jam
the plug.
- You can now connect your equipment to the mains power supply. To do this, connect one of
the ends of the mains cable to connector jon the receiver and the other end to a mains
socket.
Our description of the receiver assumes that the set has been installed according to
instructions!
1. Connection to a Television Set :
- Using a SCART cable (supplied), connect the Socket fTV-SCART of your receiver to the
SCART socket of your Television Set. This connection provides optimum picture and sound
quality.
2. Connection to a VCR :
- Using a SCART cable (not supplied), connect the Socket hVCR-SCART of your receiver
to the SCART socket of your VCR.
The equipment is operated using a cascade connection.
The video recorder images will be transmitted to the TV through the TV SCART connector
fif the video recorder supplies the control voltage when it is in read mode (12V on pin
8 of the VCR SCART connector h).
3. Connection to a decoder
Using a SCART cable (not supplied), connect the Socket gDECODER-SCART of your
receiver to the SCART socket of your decoder.
4. Connection to a stereo system :
Your satellite receiver can be connected to a stereo system using the CINCH connectors i.