Technicolor - Thomson CS806 user manual Getting Started, Content of Box, Installation

CS806 EN 4/8/06 5:12 PM Page 9

Getting Started

Content of Box

•one main unit (with 2 main speakers);

•one Music Navigator Remote control*;

•one FM antenna;

•one MW loop antennas;

•one USB cable;

•one Wireless Musiclink transceiver;

•one mp3 player;

•one set of earphones;

•one user manual;

•one PC software and driver installation CD-ROM;

•one safety leaflet;

•Owner registration Card.

Note*:

•The remote control is inserted in the front polyfoam of the package. Make sure you take the remote control out of the polyfoam before you throw it away.

•Make sure the tracks are encoded in mp3 or Windows Media formats and supported bitrates. Bitrates supported by the player:

mp3 – 32 to 320kbps wma – 48 to 160kbps

Warning:

Use of this product is for your personal use only. Unauthorized recording or duplication of copyrighted material may infringe upon the rights of third parties and may be contrary to copyright laws.

Connections of Antennas, Speakers and Microphone

	1
2	3
	7
	6
4	5
	+

1.Wireless Music-link antenna.

2.MW Loop antenna Jacks.

3.FM Antenna Jack.

4.AUX IN.

5.Main Speaker Jacks.

6.MIC VOLUME.

7.MIC INPUT Connector.

Using the FM and MW Antennas

Before you use your audio system, you’ll want to make sure both the FM and MW antennas are

positioned properly. Uncoil the FM antenna at EN the back of the unit, making sure it is fully

extended (you may even want to tape it to the wall behind the unit if possible. The higher the better.) You’ll also need to connect the MW antenna loop to the back of the unit if you listen to MW stations. Rotate the MW loop antenna for better reception.

Connecting the Speakers

Each speaker has a black (negative) and a red (positive) jack. When connecting the speakers, match the red wires to the red jacks and the black wires to the black jacks.

Speaker Wire Connection

Push Speaker terminal tab	Release tab to lock wire in
down to insert wire.	the terminal.

NOTE: Make sure the insulation is completely removed from the ends of the speaker wires at all connection points.

Installation

To ensure sufficient ventilation, keep the spacings shown below free from other surfaces:

Front View	10 cm
10 cm	10 cm

Side View
	10 cm

5 cm

2