Manual programming

Manual programming

The manual installation function is useful if some programmes have not been installed even after AUTOMATIC INSTALLATION.

1.Press and hold , the SUMMARY is displayed first, followed by the

INSTALLATION MAIN MENU.

2. Select the line marked

Manual

programming.

 

3.Display the menu using .

4.Now continue by following the messages at the bottom of the screen. For further details, read the information below.

Standard :

Select the standard using Left/Right keys that corresponds to your country from the list of standards.

The number of standards proposed will differ from one model to another.

France for France and Luxemburg

DKK’ eg. for Eastern Europe and the Middle-East

Ifor the United Kingdom and Ireland

Euro BG for Western Europe

Reception :

Your television can pick up channels either via an aerial (RF channels) or via a cable network. Certain cable networks use the same frequencies as the RF channels. If this is the case, you must select Aerial instead of Cable.

Autosearch :

Enter the programme number if you know it. If not, search using the Left/Right keys. Your television will stop at the first channel it tunes into. If you wish to memorize it, go to the line marked Store on PR number. If not, resume the search using the Left/Right keys.

INSTALLATION MAIN MENU

Exit

Manual programming

Auto installation

Programme organisation

Personal settings

MANUAL PROGRAMMING

Return

 

 

 

Standard

 

EURO BG

Reception

 

Aerial

Autosearch

 

CH- -

Fine tuning

 

 

 

 

 

 

- -

 

Store on PR number

 

Name

- - - -

 

Decoder

 

 

 

External sound path

 

 

 

 

 

 

 

Enter channel number or start

 

 

 

autosearch with < or >.

 

 

 

 

 

 

 

Select the line marked Return to return to the previous menu.

GB

Fine tuning :

You can use this to improve the picture if the transmitter frequency is out of adjustment. Use the Left/Right keys to obtain the best possible picture and sound.

Store on PR number :

Enter the programme number you wish to give the channel (e.g.: 01 for BBC1). Memorise using .

Name :

If the station has been identified by the transmitter, its name will be inscribed automatically. You can change the proposed name or enter it if it has not already been identified. Select the character you wish to modify using the Left/Right keys. Use the or keys to display the character you desire.

Decoder :

Use the Left/Right keys to tick the box if the channel is coded and if a decoder is connected to the AV1 jack.

External sound path :

Switch on your decoder. If the sound is coded or if you have no sound, activate or deactivate the box as required using the Left/Right keys.

Once you have made all the adjustments you wish to a programme, go to Store on PR number and press to memorise these. Then move on to the next channel.

Once you have completed your Manual Programming, exit the menu using .

9