EN
21
Advanced Sound Control
Fine Setting of the Components
The receiver can be directly turned on by pressing the
DVD•6CH / SAT•CABLE / TV / CD•TAPE / VCR / TUNER
buttons on the remote control, which also selects the
best surround sound mode. The default surround modes
for different components are listed in the table below.
If you decide to change the surround mode, you can
press the SURROUND button repeatedly to toggle
among the different surround mode choices and select
the one you want.
DOLBY PL II MUSIC => DOLBY PL EMULATION => 3
STEREO => ARENA => JAZZ CLUB => THEATER =>
STADIUM => DISCO => STEREO => DOLBY PL IIMOVIE
The receiver will keep the last selection in memory.

Input Signal Setting

The receiver defaults to the most convenient settings for
your easiest use (see table).
If your connection is different from the default setting,
1. Select the source
2. Press the SETUPbutton to show setup options.
3. Press the Left or Right adjustment buttons until
ANALOG is displayed.
4. Press the Up or Down arrow buttons to select among
optical/ coaxial/ analog to match your connection.
Your selection will be stored automatically.
The selected source and input source will be displayed
on the display as long as they are active, except for
some temporary change of display (e.g. adjusting
volume).

Digital Input

Select this setting to play digital signals from a DVD, CD,
LD player, SAT or TV.

Analog Input

Select this setting to play analog signals from a cassette
deck, VCR or turntable.
Source/ If Digital Input (optical If Analog Input
Input or coaxial) is selected is selected
DVD Dolby Digital PRO LOGIC
SAT Dolby Digital PRO LOGIC
VCR N/A PRO LOGIC
TV Dolby Digital PRO LOGIC
CD STEREO STEREO
TAPE N/A STEREO
TUNER N/A STEREO
DEFAULT INPUT (as seen on display)
Analog (SAT/ ANL)
Analog (DVD/ ANL)
Analog (CD/ ANL)
Analog (VCR/ ANL)
Built-in Tuner
Analog (TAPE/ ANL)
Analog (TV / ANL)
SOURCE
SAT
DVD
CD
VCR
FM/AM
TAPE
TV
NOTE

Digital input is only available for DVD, SAT, CD

and TV

AVAILABLE INPUT
Analog / Optical / Coaxial
Analog / Optical / Coaxial
Analog / Optical / Coaxial
Analog / - / -
Analog / - / -
Analog / Optical / -
SOURCE
SAT
DVD
CD
VCR
TAPE
TV
NOTE

If linear PCM source (CD), format will be Dolby

Prologic even with Digital Input.

DPL590 EN 12/16/04 3:59 PM Page 25