Technicolor - Thomson RS2600 manual Display Settings

DIMM 2

Display Settings

Display EN

BASS

SURROUND

Showing Demonstration

Not operational in CD mode. Press DEMO/DIMMER to turn on/off demonstration mode. The demonstra- tion scrolls through all display operations.

Activating the Timer

Press and release TIMER to turn on/off the timer. The timer is active when the clock icon is lit.

Display Clock / Timer

Setting the Clock

1.Press and hold CLOCK until the hour flashes on the display.

2.Press SKIP BACKWARD or SKIP

FORWARD to set the hour and then press

CLOCK to shift to minute digits.

3.Press SKIP BACKWARD or SKIP

FORWARD to set the minute.

4.Press PROG./SET to save settings and STOP to quit setting.

Note: When system is ON, you can press CLOCK to display the current time for about 2 seconds.

Adjusting the Display Brightness

1. Press and hold DEMO/DIMMER for more than 2 seconds.

2.While the dimmer is displayed, press and release DIMMER to select the desired level (DIMM 0 - 3).

Sleep Mode

You can select the time interval in minutes before the unit turns off automatically. Press SLEEP on the remote to select among OFF, 90, 60, 45, 30, 15 and 5 minutes. (Remote Only)

Setting the Timer

1.Press and hold TIMER until the ON appear with the hour flashing ( ON - timer on time )

2.	For setting time, press SKIP FORWARD				/
	SKIP BACKWARD		to set the hour and then
	press TIMER to shift to minute digits.
3.	Press SKIP FORWARD			/ SKIP BACKWARD
		to set the minute.

4.Press TIMER to change to OF (timer off time) with hour flashing. Repeat steps 2 & 3 for timer off time setting.

5.Press TIMER to select source. Press SKIP

FORWARD / SKIP BACKWARD to select between CD /TUNER / TAPE)

6.Press TIMER to set volume. Press volume UP / DOWN to set desired volume level.

7.Press PROG./SET to save settings or STOP to quit setting.

5