Tape player
EN | Playing a tape | SELECT |
| 1. Select TAPE from the SELECT switch. | RADIO |
|
| TAPE |
|
| CD |
2. Press STOP/EJ. to open the tape deck door.
3. Insert a tape into the door and push the door closed.
4. Press REW or F.FWD. to wind the tape to the desired starting position. Press STOP/EJ. to stop winding.
5. Press PLAY to start playback, PAUSE to pause playback (release the button to resume playback) and STOP/EJ. to stop playback.
Recording to tape
From radio
1.Insert a tape into the deck.
2.Select RADIO from the SELECT selector.
3.Slide BAND to access the desired radio band.
Tip:
For better recording quality, use normal bias tape (Type I) only.
5 
4.Tune to the station to be recorded.
5.Press REC and PLAY together to begin recording.
6.Press PAUSE or STOP to pause or stop recording respectively.
From CD
1.Insert a tape into the deck.
2.Select CD from the SELECT switch.
3.Insert the disc to be recorded.
4.Select the track or program to be recorded.
5.Press REC and PLAY together to begin recording.
6.Play the track or program to be recorded.
7.Press PAUSE or STOP to pause or stop recording respectively.
Troubleshooting tips
Problem | Solution |
| EN |
System doesn’t turn on | • Unplug the unit for a moment, and then plug it back in. |
|
|
| • Check the outlet by plugging in another device |
|
|
|
|
|
|
No sound | • Adjust volume setting. |
|
|
| • Make sure you’ve selected the correct function |
|
|
|
|
|
|
Poor radio reception | • Adjust the antenna for better reception |
|
|
| • Try turning off electrical appliances near the unit, such as hair dryers, |
|
|
| vacuum cleaners, or fluorescent lights |
|
|
|
|
|
|
CD doesn’t play | • Make sure you’ve put a CD in the tray |
|
|
| • Make sure the CD’s label is facing up |
|
|
| • Try another CD |
|
|
| • Make sure that Pause mode is not activated |
|
|
| • Make sure CD function is selected |
|
|
|
|
|
|
CD sound skips | • Clean the CD (as explained in “Maintenance”) |
|
|
| • Check CD for warping, scratches, or other damage |
|
|
| • Check for vibration or shock that may affect the unit; move the set if necessary. |
|
|
|
|
|
|
ESD Remarks:
In case of malfunction due to electrostatic discharge, just reset the unit (reconnecting the power supply may be required) to resume normal operation.
The descriptions and characteristics in this owner’s manual are for the purpose of general reference only and not as a guarantee. In order to provide you with the highest quality product, we may make changes or modifications without prior notice. The English version serves as the final reference on all product and operational details should any discrepancies arise in other languages.
6
TM9237 EN |
6/24/05, 5:36 PM
