AC MAINS OPERATION
CONNECTING POWER

•Check that the mains voltage marked on the rating plate on the back panel is the same as the voltage in your area.

•Plug the AC power cord into the AC inlet

•Plug the mains plug into the wall socket and switch the mains power on.

BATTERY OPERATION

This model is configured for AC mains operation only. Batteries should not be fitted to the battery compartment on the back panel.

LISTENING TO FM RADIO
To listen to FM radio:

•Fully extend the telescopic aerial at the back of the unit.

•Move the FUNCTION slide switch on the top panel to select the RADIO position.

•Move the BAND slide switch on the top panel to the FMST. (FM stereo) position.

•Turn the TUNING knob to select the station you want (the FM frequency scale is the inner scale marked around the knob in MHz).

•Fine adjust the tuning so that the station plays clearly.

If you can hear a lot of background noise when playing the station, the signal may be weak.

You may be able to improve the signal strength by adjusting the position of the telescopic aerial or moving the radio to a different position.

If this doesn’t help and the noise persists, switching to FM mono reception will reduce the background noise.

To switch to FM mono:

Move the BAND slide switch to the FM position.

NOTE:- FM mono will not give the spatial sound benefits of FM stereo, but will always play with less background noise.

LISTENING TO AM RADIO
To listen to AM radio:

•Move the FUNCTION slide switch on the top panel to select the RADIO position.

•Move the BAND slide switch on the top panel to the AM position.

•Turn the TUNING knob to select the station you want (the AM frequency scale is the outer scale marked around the knob in kHz).

•Fine adjust the tuning so that the station plays clearly. You may be able to improve the clarity of the sound by rotating the radio until the sound is clearest..

NOTE:- It is not neccessary to extend the telescopic aerial when listening to AM radio.

ADJUSTING THE VOLUME
To increase the volume:

•Turn the VOLUME control knob on the top panel clockwise.

To decrease the volume:

•Turn the VOLUME control knob on the top panel anti- clockwise.

6