iPod ADAPTORS

Before docking your iPod you must first check if your iPod has a docking connector. Early iPod models do not have one and cannot be docked to your unit. The docking connector is located on the base of the iPod as shown below.

Docking Connector

Before docking your iPod, you must first remove the cover from the docking bay and fit the correct iPod adaptor. Each iPod adaptor matches the shape of a particular iPod and is necessary to ensure that your iPod is securely held when docked.

iPod adaptor

Docking bay

FINDING THE CORRECT iPod ADAPTOR

Your iPod docking system is supplied with a selection of docking adaptors that are compatible with several models in the iPod range. Refer to the table of iPod models in the next column which lists the adaptor numbers (marked on the side of the adaptor), compatibility and instructions for obtaining an adaptor for unlisted models.

NOTE: Do not dock an iPod without fitting the correct adaptor, you may damage the iPod and your unit.

SELECTING AN ADAPTOR
LIST OF SUPPLIED ADAPTORS

CiPod mini (4GB or 6GB)

DiPod, 4th gen. with a B&W display and clickwheel with legends on wheel (20GB or 30GB)

EiPod, 4th gen. with a B&W display and clickwheel with legends on wheel (40GB)

GiPod photo, with a colour display (40GB or 60GB)

HiPod nano 1st gen. with flat sides.

IiPod video 5th gen. (30GB or 60GB) and iPod Classic (80GB or 120GB).

1)iPod video 5th gen. (80GB) and iPod Classic (160GB). 1! iPod nano 2nd. gen with round sides.

Other iPod models with dock connectors

Your iPod may have been supplied, packed with a standard dock adaptor. If so, this can be used as the docking bay on your unit is compatible with adaptors supplied by Apple.

If you don’t have a dock adaptor

If your iPod was not supplied with a standard dock adaptor, you can buy one from Apple on-line. To determine the exact model of your iPod, refer to this web-link - http://support. apple.com/kb/HT1353. You can then browse the iPod accessories page on the Apple website to find an adaptor for your iPod model that can be purchased on-line.

Once you have located the correct adaptor for your iPod, press it gently into the iPod Docking Bay before attempting to dock your iPod.

CONNECTING OTHER iPodMODELS (INC SHUFFLE)

If you own an iPod Shuffle, a model without dock connector or prefer to connect your iPod by cable, you can connect the sound output to the AUX IN jack on the top panel.

Headphone socket

To the AUX IN jack

•Using a 3.5mm stereo jack to jack cable (not supplied), connect one end of the cable to the headphone socket of the iPod, and the other end to the AUX IN jack on the top panel.

•To listen to your iPod, follow the instructions on page 10 for playing equipment connected to the AUX IN jack.

NOTE:- The volume control of the iPod must be turned up when playing through the AUX IN jack.

NOTE:- An iPod connected to the AUX IN jack cannot be operated from the remote control and will not be activated by the alarm.

7