SELECTING A SOURCE
SOUND SOURCES
You can choose to listen to the following sources -
•DAB radio
•FM radio
•iPhone/iPod (when docked)
•Aux source (when connected via the rear panel Aux In jack).
Selecting a source:
•Press the MODE button repeatedly to scroll through the available sources.
DISPLAY DIMMER
The display brightness can be switched between high, medium and low settings by pressing the DIMMER button repeatedly.
You can also set the display to dim automatically within a set time period of a button being pressed. To set up automatic dimming, refer to the ‘Backlight’ option in the settings menu (see page 13).
LISTENING TO FM RADIO
Your radio can also receive FM band radio stations.
To change to the FM band:
•Press the MODE button repeatedly to select FM mode.
To auto-tune to FM stations:
•Press the SCAN button to search for the next station in the band.
The radio will search and the tuning frequency will be displayed whilst searching.
When a usable station is detected the radio will stop tuning and play the station. If RDS data is present, the station name and scrolling radio text will be displayed. If RDS data is not present, the tuned frequency will be displayed.
To change the scan direction:
•Press the P or O button to set the scan direction you want before pressing the scan button.
To manually tune to FM stations:
•Press the P or O button to tune the band in 50kHz steps.
STEREO/MONO RECEPTION
You can set your radio to switch automatically between stereo and mono FM reception (Stereo allowed) or to receive in mono only (Forced mono). Setting to Forced mono mode may improve sound quality in areas where a weak aerial signal results in a high level of background noise.
Changing the FM audio mode:
•Whilst playing an FM radio station, press the MENU button.
‘Audio setting’ will be displayed.
•Press the OK button.
•Press the Por Obutton to switch between the options of ‘Stereo allowed’ or ‘Forced mono’.
•Press the OK button to confirm the selection.
•Press the MENU button to exit the menu.
7