CONNECTINGTOTHEAUXJACK

A cable is supplied to connect other sources with Line out or Headphone jacks to the AUX input of your docking station. These sources could include -

•iPod models other than iPhone or iPod touch.

•Other types of MP3 personal audio players.

•Personal CD players.

To connect a source via the AUX cable:

•Connect one end of the AUX cable (supplied) to the Headphone jack of the player.

•Connect the other end of the cable to the AUX-in jack located on the back panel of the Docking Station.

POWER CONTROL

STANDBY CONTROL

To turn the docking station on:

•Press the(Standby/Source) button briefly. The unit will switch on.

To turn the docking station off:

•Press and hold the(Standby/Source) button. The unit will switch off.

SELECTING A SOURCE

SOUND SOURCES

You can choose to listen to a docked iPhone/iPod touch or to another iPod model or personal stereo connected via the AUX cable.

Selecting a source:

•Press the (Standby/Source) button repeatedly to switch between iPod and AUX sources.

The source playing will change and the clock display will briefly show the source name (iPod or AUX) before reverting to clock display.

NOTE:- The iPod source (for a docked iPhone/iPod touch) can only be selected when an iPhone/iPod touch is docked.

ADJUSTING THE VOLUME

To increase the volume:

•Press the Pbutton on the control panel.

To decrease the volume:

•Press the Obutton on the control panel.

When the volume is adjusted the display will change to show the current volume setting on a scale of 0 to 40.

NOTE: When playing a source connected to the AUX input via the headphone jack, the volume control must be turned up on the source.

OPERATING THE iPhone

When playing, the iPhone/iPod touch controls are used to navigate menus and choose programs etc.

The Docking Station controls are only used to set volume.

CHARGING THE iPhone

An iPhone or iPod touch will charge when it is docked and the docking station is set to Standby or when the Aux source is selected.

6