USING THE ALARMS

Your docking station has two alarms (Alarm 1 and Alarm 2). You can set either or both alarms to wake you at your preferred time and choose to wake up to the sound of radio, music from an iPhone or a buzzer.

Setting the Alarm 1 alarm time:

•If an iPhone is docked with the Technika application running, remove it whilst setting the alarms.

•Press and hold the ALARM button.

The Alarm 1 indicator will light and the hours digit will flash.

1.Press the SET+/}or SET-/{button to set the correct alarm hour.

2.Press the /,button to confirm this setting.

The minutes digits will flash.

3.Press the SET+/}or SET-/{button to set the correct alarm minutes.

4.Press the /,button to confirm this setting.

The current alarm wake-up mode will flash.

5.Press the SET+/} or SET-/{button to select the wake-up mode you want from the options of - iPhone (IP), FM, Buzzer (BUZ).

6.Press the /,button to confirm this setting.

Alarm 1 time is now set.

Setting the Alarm 2 alarm time:

•Press and hold the ALARM button.

The Alarm 1 indicator will light and the hours digit will flash.

•Press the ALARM button briefly.

The Alarm 2 indicator will light and the hours digit will flash.

•Follow steps 1 - 6 above to set the Alarm 2 hour, minute and Alarm mode.

Checking the alarm time:

•Press the DISPLAY/MEMORY button repeatedly to change the display in the sequence -

•Alarm 1 time check.

The Alarm 1 indicator will light and the Alarm 1 time setting will be displayed.

•Alarm 2 time check.

The Alarm 2 indicator will light and the Alarm 2 time setting will be displayed.

•Date check.

The date will be displayed (in format MM.DD)

•Return to time display.

NOTE: The time check displays will cancel after 5 seconds.

Setting the alarm to wake you:

•Press the ALARM button repeatedly to set Alarm 1, Alarm 2 or both alarms to wake you as required.

The indicators shown next to each option will light on the display to confirm the mode that is set.

IMPORTANT NOTES:

•Remember to set the unit to Standby before going to bed.

•If you have chosen FM radio as wake-up mode, remember to tune to a station.

•If you have chosen iPhone as wake-up mode, remember to dock your iPhone and set the volume to a level that will wake you before going to bed. If you forget to dock your iPhone and the alarm is set, the unit will automatically wake you with a buzzer.

WHEN THE ALARM WAKES YOU

The alarm will sound at your preset time and the Alarm Mode display will flash. The volume will gradually increase in level. You can then choose to set snooze, which will temporarily reset the alarm for a further 10 minutes, or to switch it off.

To set snooze:

•To set snooze, press the SNOOZE/DIMMER button when the alarm sounds.

The alarm will stop sounding and the alarm indicator will flash. After 10 minutes, the alarm will sound again.

To switch off the alarm:

•To switch off the alarm, press the ALARM RESET button.

The unit will set to Standby.

ALARM REPEAT

The alarm(s) will sound at the same time each day when set.

9