3 Connections
3.1 Outdoor unit
If possible, try to use an outdoor unit with TWIN LNB to be able to receive satellite TV channels and digital radio channels at the same time, independent of each other. If you do not want to receive TV and digital radio channels at the same time, you may continue to use your V/H LNB (s. 3.3 Satellite TV receivers).
Connect the LNB input of the ASTRASTAR AX 1 with the LNB of your receiving equipment using an adequate coax cable. If the LNB input is overloaded the message “cable error” appears in the display after switching on.
If there is a
Outdoor unit: ISISAT A/B or ISISAT A/B/C for
a single cable solution
ADR
external voltage supply
ST 3004 S
ST 3004 S
HiFi
1using the mains switch and eliminate the error cause. Observe also 4 “Installation”.
Outdoor unit: |
|
| |
ADR | ST 3004 S |
| HiFi |
You can also connect the ASTRASTAR AX 1 to an ISISAT serial distribution. Please take into consideration that in this case not all channels can be received.
3.2 HiFi amplifier
Connect the audio analogue outputs of the ADR receiver ASTRASTAR AX 1 with an adequate amplifier input of your HiFi equipment (e.g. CD or AUX). Caution, the phono input is not adequate!
Devices with digital inputs (amplifiers, DAT recorders etc.) you can connect to the electrical digital output.
Corresponding connection cables you can buy from your TechniSat sales representative.
3.3 Satellite television receiver
If you want to operate your ADR receiver and a satellite television receiver with a V/H LNB connect the coax cable from the LNB input of the satellite television receiver to the TV receiver connection of the ADR receiver.
6
