Power supply:
Mains switch:
Power usage:
<24 W (in operation, horizontal polarisation, 400 mA supply to LNB) <15 W (in operation, excluding LNB)
< 5 W (in standby mode)
Mains voltage: |
|
230 V /50 Hz AC |
|
General: |
|
Ambient temperature | + 15° C ….+ 35° C |
Humidity | < 80 % |
Dimensions (WxDxH) | 305 mm x 135 mm x 65 mm |
Weight | 0.8 kg |
10 Troubleshooting Guide
Problem | Possible Cause | Solution |
No picture, no sound, | No power | Check power plug and cable |
Display off |
|
|
No picture, no sound, | Short circuit in LNB connection | Switch receiver off, repair short, |
Display on |
| switch receiver on again |
| Defective or missing cable | Check all cable connections |
| connection |
|
| LNB defective | Replace LNB |
| Wrong external unit set on recei- | Correct setting (see point 5.4) |
| ver |
|
| Dish positioned incorrectly | Correct dish position |
Picture shows intermittent blocks. | Heavy rain or snow | Clear dish of snow |
May switch to still image, no |
|
|
sound, at times screen black and | Dish positioned incorrectly | Correct dish position |
note "No signal" |
|
|
| Dish too small for this location | Use larger dish |
|
|
|
| Obstruction between dish and | Mount dish with uninterrupted |
| satellite (e.g. tree) | view |
|
|
|
Sound OK, screen blue | Radio mode selected | Switch to TV mode |
|
|
|
Sound OK, no picture | SCART connector not properly | Check SCART connections |
| Inserted |
|
|
|
|
44
