EN
Installation instructions
Before installation
Check that the input voltage indicated on the characteristics plate is the same as the voltage of the power outlet you are going to use.
Open the drawer and take out all the accessories and remove the packing material.
Attention! The front surface of the crockery heater may be wrapped in a protective film. Before using the crockery warmer for the first time, remove this film carefully.
Make sure that the crockery warmer is not damaged in any way. Check that the drawer opens and closes correctly. If you find any damage, contact the Technical Assistance Service.
Attention: the power socket should be easily accessible after the crockery warmer has been installed.
The crockery warmer should only be
Installation
To
The appliance to be combined with the crockery warmer will be placed directly on the latter without any need to have a separating shelf.
To
The relevant installation dimensions are indicated in mm in the diagrams shown at the end of this booklet. Proceed as follows:
1.Place the crockery warmer on the shelf and slide it towards the interior of the niche in such a way that it is centred and completely lined up with the front of the unit.
2.Check that the crockery warmer’s frame is properly levelled and is sitting evenly on the shelf.
3.Open the drawer and fix the crockery warmer to the sides of the unit using the two screws provided.
27
