Accesories supplied

1150/ 120 mm reduction.

2Support for tubecover.

2Wall support.

6Wall plugs (Ø8 x 40).

6Long bolts (Ø5 x 45).

4Wall plugs (Ø6 x 30).

4Long bolts (Ø4 x 30).

2Ø6,4 x Ø18, washers.

2Ø6,4 x Ø12, washers.

2Screws (Ø3,9 x 13).

4Screws M4 x 12.

2Clips.

Installation

Fig. 1 (Page 31)

On installing the kitchen hood make sure that the Safety Instructions set out on page 10 are complied with.

To obtain optimum performance, the external conduct must not be more than FOUR METRES long, have no more than two 90° angles and its diameter must be at least Ø120.

1)Trace and drill the points for fitting the wall plugs onto the wall (P) (Ø8 x 40) and (J) (Ø6 x

2)Attach the Supports (O) to the wall using the long bolts (Q) (Ø5 x 45) and the support (H) with the long bolts (I) (Ø4 x 30), as in figure 1.

3)Hang the kitchen hood onto the mounted supports (O). Straighten the appliance by tightening the long bolts (L) (M4 x 12).

4)Trace the location of the wall plugs (R) (Ø8 x 40), through the inside of the kitchen hood.

5)Take the kitchen hood off.

6)Drill into the wall and fit the wall plugs (R) (Ø8 x 40).

7)Hang the kitchen hood; tighten the screws

(M) (M4 x 12) with the washers (A3) (Ø6,4 x Ø12) and the long bolts (S) (Ø5 x 45) with the washers (T) (Ø6,4 x Ø18).

8)Mount the tubecovers, attaching the lower one to the support (H) as per the detail in figure 1. Lift the upper tubecover up to the desired height and mark its shape on the wall. Remove the tubecovers.

9)Fit the clips (F) to the support (C).

10)Centre the support (C) around the shape marked; trace and drill the fixing points for the wall plugs (E) (Ø6 x 30). Attach the support (C) with the long bolts (D) (Ø4 x 30).

11)Fit the part (B) if the inner tube (not supplied) is Ø120.

12)Attach the inner tube with a clamp (not supplied) to (B) or on to the motor's air outlet vent as the case may be.

13)Once the inner tube is fitted, fit the lower tubecover around the extractor fan outlet and attach the upper tubecover with the screws (G) (Ø3,9 x 13).

Active charcoal filters (Optional)

 

 

 

ENG

When exterior gas extraction is not possible,

 

then the kitchen hood may be set to purify the

 

air by recycling it through active charcoal

 

filters.

 

The active charcoal filters have an active life of

 

between three to six months, depending on

 

the individual conditions of use. These filters

 

cannot be washed nor regenerated. They must

 

be replaced once their useful life comes to an

 

end.

 

Fig. 2 (Page 31)

1)Put the filters into the lateral draught section of the motor making the holes in the filters match up (A) with the pivots (B) of the motor carcass. Turn as indicated in the diagram.

2)Remove the tubecovers (E). Fit the diffuser

(C) on to the motor's air outlet vent. Fit the tubecovers back on (E).

13

Page 4 Page 6
Page 5
Image 5
Teka DG-70, DG-60, DG-90 Vr. 01 manual Accesories supplied, Active charcoal filters Optional
Page 4 Page 6

DG-60, DG-90 Vr. 01, DG-70 specifications

Teka is a brand known for producing high-quality kitchen appliances, and among its range, the DG series—specifically the DG-70, DG-90 Vr. 01, and DG-60—stands out for their design, functionality, and advanced technologies. These built-in ovens are crafted to enhance your cooking experience while offering modern solutions for your kitchen.

The Teka DG-70 is a notable model that combines aesthetic appeal with practical features. It showcases a generous capacity, allowing for multiple dishes to be cooked simultaneously. With precise temperature control and multiple cooking modes, including fan-assisted and conventional heating, preparing meals becomes effortless. The oven is equipped with a digital display and an intuitive control panel, making it user-friendly for all cooking enthusiasts.

The DG-90 Vr. 01 takes innovation a step further with advanced features and technologies. It includes a self-cleaning function that utilizes high temperatures to burn off food residues, saving time and effort in maintaining the appliance. Additionally, this model offers a Wi-Fi connectivity option, allowing users to monitor and manage their cooking from their smartphones. With its sleek design and powerful performance, the DG-90 Vr. 01 is perfect for contemporary kitchens.

Lastly, the Teka DG-60 is designed for compact kitchen spaces without sacrificing functionality. Despite its smaller size, it boasts impressive cooking capabilities. The DG-60 features a multi-functional cooking system, providing users with diverse cooking methods, from baking to grilling. Its energy-efficient technology ensures that the oven heats up quickly, reducing cooking time and energy consumption.

All three models come with safety features such as a cooling fan and child lock, making them safe for family use. The Teka DG series not only enhances culinary creativity but also ensures that cooking is a pleasurable and efficient experience. These ovens are perfect for both amateur cooks and professional chefs looking to elevate their kitchen setup. Whether it's the spacious DG-70, the tech-savvy DG-90 Vr. 01, or the compact DG-60, each model caters to different needs while maintaining Teka’s commitment to quality and innovation.
Top Page Image Contents