Using myTune FM

Customizing myTune FM

To customize myTune FM to dock your iPod, you must adhere two of the provided
sizing pads onto myTune FM if you are using any iPod except iPod mini. If using
iPod mini, you must replace the mounting clip with the iPod mini mounting clip.

To attach sizing pads:

1. If applicable, peel the paper from the appropriate sizing
pad pair and adhere each of the two pads onto one of
the circles on the back plate of myTune FM.

To replace the mounting clip:

1. If using iPod mini, remove the attached arms by gently
pushing one arm toward the back of myTune FM. Snap
the myTune FM mini mounting clip into its place.

Mounting myTune FM

myTune FM snaps onto the air vents in your car. To accommodate different air
vent orientations, the mounting clip on the back of myTune FM swivels to a
horizontal or vertical position. You can leave myTune FM mounted in your car, and
dock iPod in myTune FM when you’re ready to listen to your tunes on the radio.
4
Sizing
Pads
revised_UG_4x4 _r1 5/16/05 5:03 PM Page 4