Installing Batteries
TekCharge MP1580 requires two or four rechargeable or alkaline AA batteries, which are housed on the bottom side of the unit. As TekCharge MP1580 doubles as a battery charger, rechargeable batteries can be recharged in the unit when
connected to a USB port on a computer or power adapter. (Please note that alkaline and rechargeable batteries should not be used together.)
1. With the unit upside down, push down on the
lever above the USB port, slide the battery cover Push down in the direction of the arrow, and then lift the
cover to remove (Fig A).
2. Insert the batteries in the directions indicated.If using only two batteries, install the pair inthe first two slots on the left or right (Fig B).
3. Replace the cover.
Using TekCharge MP1580
TekCharge can be used to power or charge any portable device that requires 5V or less, and 1000mA or less. If your device has a DC jack with center negative polarity, do not power the device with TekCharge as it does not support center negative polarity.
Center Positive | Center Negative |
TekCharge MP1580 doubles as a battery charger for two or four AA rechargeable batteries. When the batteries are empty, you can recharge the batteries without removing them from TekCharge MP1580.
4 | MP1580 |
