SLEEP MODE

THE SLEEP FUNCTION

The Sleep function allows you to program your radio to switch itself off after a set period of 90, 80, 70, 60, 30 or 10 minutes.

To activate the Sleep function:

•Press the SLEEP button.
The display will show Sleep Timer 90 minutes.

•Now press the SLEEP button repeatedly until your required sleep time appears on the display.

After a few seconds the Sleep display will disappear and the ‘SLEEP’ symbol will appear on the display with confirmation of the sleep minutes you set (8=80 minutes, 6=60 minutes etc).

Sleep symbol

Sleep minutes symbol

Your radio will continue to play, then will set to Standby when the sleep time expires.

To cancel the Sleep function once set:

•Press the SLEEP button during Sleep mode.
SCANNING

When first used, your radio scanned the DAB band for available stations. The station services found were then stored in your radio’s memory.

You can re-scan the band at any time if you move to a different area or just to refresh the stored list of available stations. Two types of scan are available, a Local Scan that scans UK DAB bands for available services and a Full Scan, that scans all bands.

TO START A SCAN

•Switch on the radio and select the DAB band.
•Press the MENU button briefly.
The radio will now display the legend ‘Manual tune’.

•Rotate the VOLUME/SELECT knob to display your choice of scan - Autoscan local or Autoscan full.

•Press the JOG MODE/SELECT button to start the scan. The scanning display will be shown while the scan takes place.

Number of stations found
Progress bargraph
A bargraph shows scan progress and the number of services found is displayed.
MANUAL TUNING
If preferred, you can also tune DAB stations manually.

To Manually tune:

•Press the MENU button briefly.

The radio will now display the legend ‘Manual tune’.

•Press the JOG MODE/SELECT button to select manual tuning.
•Rotate the VOLUME/SELECT knob to browse the DAB multiplex channels.

•Press the JOG MODE/SELECT button to display information about a multiplex channel.

If a station multiplex is located on the selected channel, the multiplex name and frequency will be displayed above a signal strength bargraph.

9