Syntax and Commands
PS2520G and PS2521G Programmer Manual 17
Table 4: Miscellaneous Commands (Cont.)
Command Description
Resets the protection levels and states,
resets the current and voltage levels to zero,
sets the output off, and sets memory point to
00.
Initiates internal self-test and reports results.
Wait to continue. This command forces
sequential operation of commands. This
command is required by IEEE 488.1-1987.
The power supply, however, forces sequen-
tial operation of commands by design.
Returns the SCPI version level.
Sets Auto Sequence on or off.1
Returns Auto Sequence mode.1
1Not a SCPI standardized command.