Arbitrary Waveform Generators

AWG520

Arbitrary Waveform Generators •www.tektronix.com/signal_sources 3
Auxiliary Outputs
Marker –
Number: AWG520: 4.
Level:
Hi/Lo: –2.0 V to 2.0 V (0.05 Vp-p to 4 Vp-p)
into 50 Ω; –4.0 V to 4.0 V (0.1 Vp-p to 8 Vp-p)
into 1 MΩ.
Resolution: 0.05 V.
Accuracy: Within ±0.1 V ±5% of setting.
Rise/Fall Time (10 to 90%, typical):
At 1 Vp-p, Hi +0.5 V/Lo –0.5 V: 0.5 ns.
At 2 Vp-p, Hi +1 V/Lo –1 V: 1.0 ns.
At 4 Vp-p, Hi +2 V/Lo –2 V: 2.0 ns.
Variable Delay:
Range: 0 ns to +2 ns.
Resolution: 20 ps.
Marker Skew: 32 ps.
Connector: Rear-panel SMB.
Clock Out –
Level: ECL 100 K compatible.
Connector: Front-panel BNC.
Noise –
Level:
Range: –145 dBm/Hz to –105 dBm/Hz.
Resolution: 1 dB.
Accuracy: ±2.5 dB at 100 MHz.
Flatness: ±2.5 dB, 1 MHz to 300 MHz
(referenced to –105 dBm/Hz at 100 MHz).
Type: Gaussian.
Connector: Front-panel BNC.
Digital Data Out (Opt. 03) –
Output Signals: D0 to D9 (10-Bits).
Level:
Hi/Lo: –2.0 V to 2.0 V (0.1 Vp-p to 4 Vp-p) into
50 Ω; –4.0 V to 4.0 V (0.2 Vp-p to 8 Vp-p)
into 1 MΩ.
Resolution: 0.1 V.
Accuracy: Within ±0.1 V ±5% of setting.
Rise/Fall Time (10 to 90%) typical:
At 1 Vp-p, Hi +0.5 V/Lo –0.5 V: 0.5 ns.
At 2 Vp-p, Hi +1 V/Lo –1 V: 1.0 ns.
At 4 Vp-p, Hi +2 V/Lo –2 V: 2.0 ns.
Skew Between Data: ≤1 ns, 330 ps typical.
Delay:
Data to marker: 4.4 ns.
Clock to data: 3.7 ns.
Connector: Rear-panel SMB.
Auxiliary Inputs
Trigger In –
Impedance: 1 kΩor 50 Ω.
Polarity: POS or NEG.
Input Voltage Range:
1 kΩ:±10V.
50 Ω:±5V.
Threshold:
Level: –5.0 V to 5.0 V.
Resolution: 0.1 V.
Accuracy: ±(5% of level + 0.1 V).
Pulse Width (0.2 V amplitude): 10 ns minimum.
Trigger Holdoff: 500 ns maximum.
Delay to Marker: 30 ns +1 clock.
Connector: Front-panel BNC.
Event Trig Input –
Number of Events: 4 Bits.
Input Signals: 4 event bits, strobe.
Threshold: TTL level.
Pulse Width: 64 clocks minimum.
Maximum Input: 0 V to +5 V (DC + peak AC).
Delay to Analog Out: ≤384 clock +20 ns.
Impedance 2.2 kΩ, pull-up to +5 V.
Connector: Rear-panel 9-Pin D-sub.
CH1 ADD Input –
Input Voltage Range: –1 V to 1 V (DC + peak AC).
Impedance: 50 Ω.
Bandwidth (–3 dB): DC to 200 MHz at 1 Vp-p input.
Amplitude Accuracy: ±5%.
Connector: Front-panel BNC.
Reference 10 MHz Clock IN –
Input Voltage Range: 0.2 V to 3.0 Vp-p,
±10 V maximum.
Impedance: 50 Ω, AC coupled.
Frequency Range: 10 MHz ±0.1 MHz.
Connector: Rear-panel BNC.
External Sample Clock In
Input Voltage Range – 0.25 Vp-p to 1 Vp-p.
Maximum Input Voltage Range – ±10 Vmax.
Impedance – 50 Ω, AC coupling.
Frequency Range – 10 MHz to 900 MHz.
Duty Cycle Ratio – 40% to 60%.
Pulse Width – 0.5 ns minimum.
Connector – Rear panel BNC.
Display
Area – 13.2 cm (5.2 in.) horizontal by 9.9 cm
(3.9 in.) vertical.
Resolution – 640 horizontal by 480 vertical pixels.
Data Storage
Internal Hard Disk Drive – 10.0 GB (standard).
Floppy Disk Drive – 3.5 in., 1.44 MB.
Option 10 – Substitute flash disk (128 MB) for HDD,
add standby switch. (Opt. 10 is best suited for ATE
and system usage requiring 7x24 hour operation.)
Option 11 – Substitute Internal Hard Disk Drive
with removable 10.0 GB Hard Disk Drive mounted
on top of the instrument
Environmental, EMC, Safety
Temperature –
Operating: 10 ºC to +40 ºC.
Nonoperating: –20 ºC to +60 ºC.
Humidity –
Operating: 20 to 80%, noncondensing.
Nonoperating: 5 to 90%, noncondensing.
Altitude –
Operating: Up to 4,500 m. (15,000 ft). Maximum
operating temperature decreases 1 ºC per 300 m
above 1.5 km.
Nonoperating: Up to 15,000 m (50,000 ft.).
Vibration (test limits) –
Operating: 0.27 GRMS from 5 to 500 Hz, 10 minutes
duration.
Nonoperating: 2.28 GRMS from 5 to 500 Hz,
10 minutes duration.
Shock (test limits) –
Nonoperating: 294 m/s2(30 G), half-sine,
11 ms duration.
EMC Compliance –
EN50081-1.
EN50082-1.
FCC Part 15, Subchapter B Class A.
AS/NZS 20641/2.
Safety – UL3111-1, CSA1010.1, EN61010-1,
IEC61010-1.
Power
Source Power –
Line Voltage Range: 100 to 240 VAC.
Line Frequency: 48 to 63 Hz.
Power Consumption – 600 W at 8 A maximum.
Physical Characteristics
Dimensions mm in.
Height 178 7.0
Height with Opt. 11 215.5 8.48
Width 422 17.5
Depth 560 25.8
Weight kg lbs.
Net 17 37.5
Warranty – One year parts and labor.
Other
Programmable Interface –
GPIB: 24-Pin IEEE488.1 connector.
Ethernet: 10Base-T, RJ-45 connector.
Keyboard Connector – 6-Pin mini-DIN connector.