Service Information
P6131 Instruction Manual 15
MaintenanceUse the following procedures to clean and maintain the P6131 probe.
To remove accumulated dirt from the probe exterior, use a soft cloth dampened
with a nonresidue cleaner, preferably isopropyl alcohol. In particular, avoid
solvents such as benzene, toluene, xylene, or acetone.
Modular construction has been used in the design of the probe to simplify repair.
The probe head, tip assembly, compensation box, and cable are available as
separate units through your local Tektronix field office or representative.
Individual components within the compensation box are not replaceable. See
page 19 for a list of replaceable parts.
The entire probe-head can be replaced by simply pulling the probe-head
assembly away from the cable and pushing a new unit in place. To remove the
compensation box, unscrew the retainer and pull the cable until it separates from
the box.
The probe tip is easily replaced by following the replacement procedure included
with the replacement tips.