Operating Examples
Figure 2 57: Autostep File List
8.Using the general purpose knob, select the SAMPLE±6.AST file.
In this example, there is only one file in the list, so it will already be selected.
9.Select O.K. from the
10.Press the CH1 On/Off button on the front panel to turn on waveform output.
11.Press the MANUAL button on the front panel.
Check on the oscilloscope to make sure CH1 waveform output advances one step each time the button is pressed. The waveform or sequence for the step is output once, then output stops.
This completes the Example 3.
AWG2021 User Manual | 2 67 |