Operating Examples
Auto Load Using the Auto Load process, it is possible to automatically load files from a designated device into the instrument's internal memory when the power to the instrument is turned on. You can do this with the following procedure:
1.Select Auto Load from the bottom menu.
2.Select from NVRam from the side menu.
3.Power the instrument off, then on again.
Check to make sure that the designated files were loaded from the NVRAM to the internal memory when the power to the instrument was turned on.
This completes the Example 4.
Also, note that files are loaded/saved in the same manner when the Device is set to Disk. For a floppy disk, hierarchical file structures can be created using directories. See the UTILITY menu Disk item in Section 3, Reference, for directory creation instructions.
NOTE. You must format new floppy disks. See the UTILITY menu Disk item in Section 3, Reference, for formatting instructions.
AWG2021 User Manual | 2 73 |