Operating Examples

Example 6: Using the Waveform Function Generator

The instrument is equipped with a waveform function generator for generating simple waveform functions. Pressing the F.G button on the front panel will change the mode to function generator (FG) mode and enable you to set various waveform parameters.

In Example 6, you will select a sine wave for CH1. Then you will set the parameters and output the waveform.

1.Press the front panel F.G (Function Generator) button. The FG mode menu is displayed.

CH1 Waveform Settings As described below, you will define a 200 kHz, 5 V amplitude, 0 V offset sine wave on CH1.

1.Select Sine from the bottom menu.

Figure 2 -66 shows a sine wave displayed within the CH1 frame on the screen.

Figure 2 "66: Screen When Sine Set for CH1

Set the frequency to 1 MHz.

2 "78

AWG2021 User Manual