Operating Examples

Waveform Output Connect the AWG2021 to an oscilloscope with 50 W cables and 50 W terminations as shown in Figure 2 -68. The waveform output for this instrument is calibrated for a 50 W load.

AWG2021

Oscilloscope

CH 1

50 W

Termination

CH 1

 

50 W Cable

Figure 2 ￿68: Connections for Example 6

1.Press the front panel CH1 On/Off button and switch on. The On/Off indicator should light up. In this operation, the waveform outputs continu- ously from the CH1 output connector. Set the oscilloscope appropriately to display the waveform on the oscilloscope screen.

This completes the Example 6.

AWG2021 User Manual

2 ￿81