EDIT Menu

1

2

3

Figure 3 *26: Menu Display When Draw... is Selected

(1)

Point Cursor

Is used to draw points. When this cursor can be moved, the

 

 

direction in which it can be moved is shown by the arrows.

 

 

 

(2)

X*Y Coordinate Axis

Shows the X and Y coordinates of the point cursor described in

 

 

￿1￿ above. When the coordinates for a coordinate axis are

 

 

displayed inverted, it indicates that the cursor can be moved in

 

 

that direction.

 

 

(3) Button Operations

 

 

 

 

Pressing the CURSOR button toggles the active vertical bar cursor from left to right and back again. Pressing the VALUE button toggles the direction in which the point cursor can be moved from up-down to left-right and back again.

1.Move the left and right vertical bar cursors to define the area within which the waveform will be drawn and then select Draw... from the side menu.

The point cursor will appear in the middle of the vertical axis between the left and right vertical bar cursors.

2.Press VALUE button on the front panel.

AWG2021 User Manual

3 *47