EDIT Menu
3.Use the general purpose knob to move the point cursor to the location where you want to place a point.
Each time the front panel VALUE button is pressed, the direction of movement for the point cursor switches between horizontal (X) and vertical
(Y). The
4.Select Add Draw Point from the
Draw points can be placed outside the left and right vertical bar cursors. However, such points are not drawn when Execute is pressed.
NOTE. You cannot set multiple draw points above the same horizontal position. If you try to do so, the instrument asks you if you want to change the level for the point already above the horizontal position. To do so, select O.K. To abort the operation, select Cancel.
5.Repeat Steps 3 and 4 to place as many points as desired.
6.To delete a draw point added with Add Draw Point, move the point cursor to the point to be deleted, then select Delete Draw Point. This deletes the point.
If Delete Draw Point is pressed repeatedly, the added points closest to the point cursor are deleted in order.
7.Press the Smooth button in the
Smoothing can be toggled On or Off by pressing the Smooth button. When smoothing is On, the waveform data is spline interpolated and the curve outside the left and right vertical bar cursors and the placed points are connected with a smooth curve. When smoothing is Off, the interpolation is linear and the curve outside the left and right vertical bar cursors and the placed points are connected with a straight line. When the vertical bar cursors are at the ends of the waveform being edited, the waveform start and finish are given the values to be smooth waveform as the repetition waveforms whether smoothing is on or off.
8.Select Execute from the
9.To return to the original waveform, select Undo from the bottom menu.
10.Press the Smooth button in the
3 48 | AWG2021 User Manual |