EDIT Menu
2.Use the general purpose knob to move the active vertical bar cursor to the position where the other waveform is to be inserted.
Figure 3 37: Defining the Location for Insertion
The waveform is inserted right before the active vertical bar cursor. However, if the cursor is at the end of the waveform, the data is inserted directly after the cursor.
3.After setting the position to insert the other waveform, select Insert Other Waveform from the side menu. A list of waveform files is displayed.
Data placed into the paste buffer with Cut or Copy is listed at the top of the file list with the name ªPaste Buffer.º The data in the paste buffer can be inserted into any desired location by selecting this item.
4.Use the general purpose knob to select the waveform file to be inserted from the file list.
AWG2021 User Manual | 3 61 |