EDIT Menu

The waveform for that file will appear along with the waveform point size, the clock frequency and the voltage value.

6.Select Continue from the sub-menu.

The menu shown before you selected Show Catalog Entry will reappear.

7.Select Set from the side menu.

The selected file will be inserted and the output parameters for that waveform will be set.

Figure 3 ￿130: Setting a File

Selecting Cancel will cancel the setting operation and the previous menu will appear.

Use Set Without Parameter instead of Set when you want to designate the waveform without changing the parameters. The default parameters will be set when the editor is opened using New Autostep or when a waveform is designated for a new step added with Insert New Step or Append New Step. The default values for the output parameters are shown below.

Clock

100.0MHz

CH1 Operation

Normal

Filter

Through

Ampl

1.000V

Offset

0.000V

Among them, Clock and CH1 Operation depend on the CH1 file.

Use Clear from the side menu to delete the file setting for the channel indicated by the cursor.

AWG2021 User Manual

3 ￿179