SETUP Menu

Setting Filter

The filters selections are: 50, 20, 5, 1 MHz and Through (no filter).

To set Filter, perform these steps:

1.Select Filter from the bottom menu. The filter icon will be highlighted on the screen.

2.Select the channel from the side menu.

3.Turn the general purpose knob to select the desired filter.

Setting Amplitude and Offset

Use Amplitude and Offset to set the output amplitude and offset for the vertical axis 12-bit full scale voltage. These values are terminated with 50 W.

Figure 3 -159 shows the display when the amplitude is set to 5 V and the offset is set to 1 V.

Max

Min

Figure 3 ￿159: Setting Amplitude and Offset

AWG2021 User Manual

3 ￿225