LOAD/SAVE Menu

Loading Files from Mass Memory into Internal Memory

If Disk or NVRam has been selected for Device, the LOAD menu appears when the Load item in the bottom menu is selected. See Figure 3 -172. The internal memory file list is displayed on the upper screen and the list of files saved onto mass memory is displayed on the lower screen.

Figure 3 ￿172: LOAD Menu

To load files into internal memory from mass memory, perform these steps:

1.Select Device from the bottom menu.

2.Select Disk or NVRam from the side menu.

When the Device is Disk, the Change Directory item is displayed on the side menu. When this item is selected, the current directory can be changed. This item is the same as the Change Directory item on the UTILITY menu. See the explanation in ªUsing the Disk Menuº in Section 4E, ªUTILITY Menu.º

There is no directory hierarchy for the NVRam.

3.Select Load from the bottom menu.

AWG2021 User Manual

3 ￿251