LOAD/SAVE Menu
Selecting Instruments
Made by Other
Manufacturers
created with the name shown in the ªLoaded asº column. Figure 3
Figure 3 $175: GPIB Source List
7.Choose Select Source Address from the side menu and, using the general purpose knob, select the GPIB address for the instrument from which data is to be loaded.
8.Select Load from the side menu.
Data transfer will begin and the transferred file will be added to the list of files stored in internal memory at the top of the screen, under the name shown in the ªLoaded asº column.
Data transfers can include not only waveform data but output settings such as clock frequency and amplitude as well. When the clock frequency and amplitude exceed the allowable setting range in the SETUP menu, these values will be replaced with the nearest allowable value (in other words, the maximum or minimum value).
When Load Without Preamble from the side menu is selected, waveform data is loaded by itself, i.e. without output settings. In such cases, the output parameters are set to their default values.
The following procedure is used to select digital storage oscilloscopes made by other manufacturers. The procedure up to Step 5 is the same as that for ªLoading waveform dataº, above.
1.Using the general purpose knob, select Others... from the GPIB Source list.
2.Press the Load button in the side menu. A list of models will appear.
3 | $256 | AWG2021 User Manual |