LOAD/SAVE Menu
Auto Loading
Use the side menu of the Auto Load to automatically load files from the mass memory into the internal memory when the instrument is switched on.
1.Select Auto Load from the bottom menu.
2.Select an item from the side menu.
From Disk | When the instrument is switched on, files are loaded |
| automatically from the floppy disk to the internal |
| memory. In this case, all the files in the AWG2021 |
| directory are loaded. If there is no AWG2021 |
| directory, no auto load is carried out. This directory |
| can be created with Disk on the UTILITY menu. |
| For details, see the explanation in ªUsing the Disk |
| Menuº in Section 4E ªUTILITY Menu.º |
From NVRam | When the instrument is switched on, all the files in |
| the |
| into the internal memory. |
Off | Switches off auto loading. |
When from Disk or from NVRam is selected from the side menu, go to the next procedure.
3.Switch the AWG2021 power off, then on again. Double check that files are automatically loaded from mass memory to internal memory the way you selected from the side menu.
3 258 | AWG2021 User Manual |