Basic Menu Operation

Menu Operations

Operations (settings, procedures and selection of parameters for waveform output) are performed on this instrument by means of the system's menus.

When one of the menu buttons in the center of the front panel is pressed, the menu corresponding to that button will appear. There are six menu buttons: the five buttons used in arbitrary waveform generation mode (SETUP, MODE, EDIT, LOAD/SAVE and UTILITY) and below them the button used in function waveform generation mode (F.G). See Figure 2 -7.

The menu items displayed on the screen are selected by pressing the corresponding bezel buttons at the bottom of the screen (hereafter referred to as bottom buttons) or to the right of the screen (hereafter referred to as side buttons). There are 7 bottom buttons and 5 side buttons. When one of the buttons is pressed to select an item, that item will be displayed inverted on the screen to indicate that it is operational. See Figure 2 -7.

MENU Buttons

MENU

SETUP

MODE

EDIT

LOAD/SAVE

UTILITY

Side Buttons

F.G

Bottom Buttons

Figure 2 ￿7: Menu Buttons and Bezel Buttons

AWG2021 User Manual

2 ￿15