Basic Menu Operation

Using the Front Panel Numeric Keys

In the following section, we will explain these numeric input methods in more detail.

To specify numeric values with the numeric keys, ENTER key, and unit keys on the front panel, perform the following steps.

1.Press the button for the menu item you want to change.

2.Use the numeric keys to input the desired value.

3.Press one of the unit keys or the ENTER key.

Figure 2 -8 shows the menu displayed when Amplitude is selected from the SETUP menu. In this figure, the numeric keys are used to change the amplitude. Here the asterisk in the numeric input column indicates that the value is being input. Press the front panel ENTER key to enter the value and remove the asterisk.

Figure 2 ￿8: Numeric Input Using Numeric Keys

Numeric Input Keys. Four types of keys are used to enter numeric values: the numeric keys (0 ± 9), the unit keys (ns, MHz/ms, kHz/ms/mV and Hz/s/V), the Delete key and the ENTER key. These are shown in Figure 2 -9.

AWG2021 User Manual

2 ￿17