Capture Mode
1.Push the lens' cover and then enter the capture mode
2.Holding the camera still, point the camera at the subject, gently press SHUTTER button and then compose the image.
3.Press SHUTTER button. When the image shown on the screen turning left, indicating the image is recorded.
Press MENU button you can select the White Balance | EV Shift Resolution Image Quality and |
so on according to your favourite and then press SET | button affirm and back to previous. |
Press MENU button again can back to standby mode for capture.
Before recording, press W/T button can zoom in or zoom out.
Press | button to switch the flash mode Off Auto |
Press | button to select different capture modes such as Single,Continuous and 10sec |
Slide | button for Macro then icon will appear on the screen the macro range is |
150mm to 250mm.
Monitor Screen
|
| Capture mode |
| 035 | Counter(Recorded/ |
|
|
|
| 000 | Allowance) |
|
| Image Quality |
|
| Macro |
| 5M | Resolution |
|
| Power Capacity |
| 0.0 | EV Shift |
| 2008/01/08 | Data/Time |
|
| 00:18:16 | |||
|
| Flash mode |
|
|
|
|
|
|
|
|
|
| AWB | White Balance |
|
|
|
5M | EV 0.0 |
| 035 |
AWB | 000 |
| |
2008/01/08 | 00:18:16 |
7
