
Calibration Procedures Teledyne API – T101 Operation Manual
176
STEP TWO: Perform the zero/span check.
Wait until H2S
STB falls below
0.5 ppb. Thi s may
take several
minutes.
The value of H2S
STB may jump
significantly. W ait
until H2S STB falls
below 0.5 ppb. This
may take several
minutes. SPAN CAL M H2S STB=XXX.X PPB H2S =XXX.X
< TST TST > ZERO SPAN CONC EXIT
SAMPLE H2S STB=XXX.X PPB H2S =XXX.X
< TST TST > CAL CALZ CALS SETUP
ZERO CAL M H2S STB=XXX.X PPB H2S =XXX.X
< TST TST > ZERO CONC EXI T
SAMPLE H2S STB=XXX. X PPB H2S =XXX.X
< TST TST > CAL CALZ CALS SETUP
EXIT r et urn s to t he mai n
SAMPLE dis
p
la
y
ACTION:
Record the
H2S readings
presented in the
upper righ t corner of
the display.
ACTION:
Record the
H2S readi ngs
presented in the
upper right corner of
the disp lay.
SAMPLE RANGE = 500.0 PP B H2 S =XXX.X
< TST TS T > CAL CALZ CALS SETUP
Scroll to the H2S
STB test fun ctio n.
07266B DCN6485