Getting Started Teledyne API – T101 Operation Manual
40
Table 3-7. Inlet / Outlet Connector Descriptions
REAR PANEL LABEL FUNCTION
SAMPLE Connects the sample gas to the analyzer. When operating the analyzer without
zero span option, this is also the inlet for any calibration gases.
EXHAUST Connects the exhaust of the analyzer with the external vacuum pump.
SPAN On units with zero/span/shutoff valve options installed, connect a gas line to
the source of calibrated span gas here.
ZERO AIR On Units with zero/span valve or IZS option installed, this port connects the
zero air gas or the zero air cartridge to the analyzer.
Chas sis
Sample
Zero Ai r
Exhaust
Span
MODEL 701
Zero Air
Generator
Calibrated
H2S GAS
(At hi gh
concentration)
Sou r ce of
SAMPLE Gas
Removed
during
Cali brat ion
MODEL T700 G as
Dilution
Calibra tor
Figure 3-11. Pneumatic Connections, Basic Configuration Using Gas Dilution Calibrator
07266B DCN6485