Operating Instructions Teledyne API - Model T200H/T200M Operation Manual
138
To Turn the over-range feature on or off, press:
From the
AIO CONFIGURATION SUBMENU
(See Section 6.13.4.1)
DIAG AIO DATA_OUT_2 5V, NXCNC1, NOCAL
<SET SET> EDIT EXIT
DIAG AIO DATA_OUT_2 OVERRANGE: ON
<SET SET> EDIT EXIT
DIAG AIO DATA_OUT_2 RANGE: 5V
SET> EDIT EXIT
DIAG AIO DATA_OUT_2 OVERRANGE: ON
ON ENTR EXIT
DIAG AIO DATA_OUT_2 OVERRANGE: OFF
OFF ENTR EXIT
DIAG ANALOG I/O CONFIGURATION
PREV NEXT ENTR EXIT
Toggle this button
to turn the Over-
Range feature ON
or OFF
Continue pressing SET> until you reach the
output to be configured
DIAG AIO AOUTS CALIBRATED: NO
SET> CAL EXIT
4.13.5.4. Adding a Recorder Offset to an Analog Output
Some analog signal recorders require that the zero signal is significantly different from
the baseline of the recorder in order to record slightly negative readings from noise
07270B DCN6512