Teledyne T200H/M

Teledyne API - Model T200H/T200M Operation Manual Getting Started

3.4.8.3. Connecting to a Multidrop Network

The multidrop option is used with RS-232 and utilizes both com port DB-9 connectors

(RS-232 and COM2) on the rear panel to enable communications of up to eight

analyzers with the host computer over a chain of RS-232 cables. It is subject to the

distance limitations of the RS 232 standard.

The option consists of a small printed circuit assembly, which is seated on the analyzer’s

CPU card (see Figure 3-12). One Option 62 is required for each analyzer along with one

6’ straight-through, DB9 male  DB9 Female cable (P/N WR0000101).

If your unit has a Teledyne API RS-232 multidrop card (Option 62), see Section 4.11.9

for instructions on setting it up.

Figure 3-12: T200H/M Multidrop Card

07270B DCN6512