Teledyne T200H/M

Teledyne API - Model T200H/T200M Operation Manual Operating Instructions

SAMPLE A1:NXCNC1=100PPM NOX=XXX.X

< TST TST > CAL SETUP

SAMPLE PRIMARY SET UP MENU

CFG DAS RNGE PASS CLK MORE EXIT

SAMPLE T200 NOX ANALYZER

NEXT PREV EXIT

Press EXIT at

any time to

return to

SETUP menu

Press EXIT

any time to

return to the

AMPLE

Press NEXT of PREV t o move back

and forth through the following list

of Configuration information:

 MODEL NAME

 SERIAL NUMBER

 SOFTWARE REVISION

 LIBRARY REVISION

 iCHIP SOFTWARE REVISION1

 HESSEN PROTO COL REVISION1

 ACTIVE SPECIAL SOFTWARE

OPTIONS1

 CPU TYPE

 DATE FACTORY CONFIGURATION

SAVED

Only appears if rel evant opt ion of Feat ure is ac tive.

4.6. SETUP  ACAL: AUTOMATIC CALIBRATION

Instruments with one of the internal valve options installed can be set to automatically

run calibration procedures and calibration checks. These automatic procedures are

programmed using the submenus and functions found under the ACAL menu.

A menu tree showing the ACAL menu’s entire structure can be found in Appendix A-1

of this manual.

Instructions for using the ACAL feature are located in the Section 7.7 of this manual

along with all other information related to calibrating the T200H/M analyzer.

07270B DCN6512