(d)LINE DIAGNOSTICS
(i)Typical modem configuration for
Switch 1 = ON (TxA = 0dBm)
Switch 3 = ON (RxA =
Switch 4 = OFF (RTS/CTS = 1ms)
Switch 5 = OFF (RTS/CTS = 1ms)
Switch 6 = ON (Constant Carrier mode).
Switch 7 = OFF
Switch 8 = ON (Line Termination = 600 ohms)
Switch 9 = OFF (Soft Carrier = OFF)
(ii) Typical modem configuration for
Switch 1 = ON (TxA = 0dBm)
Switch 3 = ON (RxA =
Switch 4 = OFF (RTS/CTS = 1ms)
Switch 5 = OFF (RTS/CTS = 1ms)
Switch 6 = ON (Constant Carrier mode).
Switch 7 = OFF
Switch 8 = ON (Line Termination = 600 ohms)
Switch 9 = OFF (Soft Carrier = OFF)
Adjustments…
In a network with high line loss (greater than 16dB) change Switch 3 (RxA) to OFF
If there are conditions that can cause
Note that noise level should be
