Telex sc-600 instruction sheet General Description, SC-600 Product Features

Telex®TELEX COMMUNICATIONS, INC. 12000 Portland Ave. South, Burnsville, MN 55337

Instruction Sheet

General Description

The SC-600 Amplified Broadband Split- ter-Combiner makes it possible to operate eight UHF wireless intercom transceivers using only two antennas.

SC-600

CAT. NO. 71197000

AMPLIFIED BROADBAND UHF

ANTENNA SPLITTER-COMBINER

PN 801547

It also features a high degree of output isolation;

anecessity in multi-frequency systems to pre- vent intermodulation

DO NOT attempt to install and/or turn on the power to the SC-600 until you have read com- pletely and understood this manual.

	SPECIFICATIONS
Frequency Range	520-760 MHz
Antenna Connectors	Standard TNC Receptacles
AC Power Input	110\220 VAC 50\60Hz, 130 VA
DC Power Output:	15 VDC 1.3A
Size (Approximate)	H: 3.50" (88.9mm), W: 17.00" (431.8mm) D: 12.50" (317.5mm)
Weight: (Approximate)	15 lbs.
	Antenna Splitter
3rd Order Intercept Output:	Greater than 28 dBm
Net Gain	Greater than 2 dB
Noise Figure	Less than 4 dB
Output Isolation	Greater than 20 dB
	Antenna Combiner
Net Gain	0 dB
Noise Figure	10 dB Typ
3rd Order Intermodulation	-55 dbm @ + 13 dbm
	Input, Each Transmitter

SC-600 Product Features:

￿Ideal compliment to your BTR-600/BTR-500 UHF Wireless Intercom System

￿Standard IEC 320 Power Input Connector

￿Power Output for up to eight transceivers help make your whole system easier to handle

￿High-quality TNC Connectors ensure consistent impedance across the entire frequency range

￿Rack Mount Brackets included for 19" (482.6mm) rack

-1-