Installation
Unpacking
Thepackage contains the following items. Contact the shipper or your Audiocom
dealerimmediately if anything is damaged or missing. Detach and fill out the regis-
trationcard and return it to Telex to properly register your SPS2000A.
Quantity Description
1 SPS2000APower Supply
1 Warrantyand registration card
1 UserManual
4 Rubberfeet (install for desktop use of the SPS2000A)
1 Powercord
Configuration Switches
WARNING
The followinginstructions are for use by qualified personnel only.
Toavoid electric shock, do not remove the cover unless you are
qualified to do so.
AVERTISSEMENT
Les instructions qui suivent s'adressent uniquement a un techni-
cien qualifie. Pourevite des chocs electriques, ne pas ouvrir le
boitier,a moins d'y entre habilite.
TheAudiocom / Clear-Com switch (S200) is factory set for use with Audiocom in-
tercomstations. Before using the SPS2000A with Clear-Com, remove the top cover
andchange the setting as shown in Figure 2. The top cover is secured by five screws
onthe top and three screws on each side.
TheCombine / Isolate switch position may be changed at any time by inserting a pen
pointor other small object through the front panel. When the switch is in the Com-
bineposition, all users on both channels may intercommunicate. When the switch is
setto the Isolate position, channels 1 and 2 cannot intercommunicate.
Intercom Channel and Program Connections
ChannelCapacity: Whenconnecting intercom stations to the SPS2000A, determine
thetotal current for all stations on each channel. Thetotal per channel should not ex-
ceed2A. If you exceed this limit, the SPS2000A will provide an overload indication.
6
Audiocom®