Tempo DSTS2 Talk Mode, Cord Sets, Belt Clip/Hanging Loop, Dialling, Redial, Timed-Break-Recall

TALK MODE

Dialling

Select dialling mode via the TONE/PULSE switch.

Connect to line and monitor to ensure the line is free, then switch to TALK. Check for dial-tone.

It is possible to switch from PULSE to TONE at any time (but not from Tone to Pulse).

Redial

Switch TALK to MONITOR to TALK, then press LNR. Digits are re- dialled in the dialling mode they were entered previously.

After disconnection from the line, the LNR memory is kept for >5 min- utes.

Timed-Break-Recall

For register recall. Press the TBR button to give a line-current break.

Mute

It is possible to cut-off transmission by muting the microphone. Pressing the MUTE button will offer privacy or will reduce sidetone in noisy environments. Release the button to talk.

Ground-start operation

DSTS2 may be used on ground-start (or earth- calling) lines. Con- nect a ground to the green wire of the line-cord (pin 3 of the BT UK plug - if fitted and pin 5 of RJ11 - if fitted). Switch the DSTS2 to TALK then press and release the G/S button.

CORD SETS

A range of alternative cord sets for the DSTS2 are available. In addi- tion we can also supply modular adaptors (break-out connectors) to suit many types of modular and frame jack sockets. Please contact your nearest supplier for further details.

BELT CLIP/HANGING LOOP

Rotate the clip to use as a hanging loop.

3